100% Original Steel Annealing Furnace - Trolley/Car type industrial electric resistance heat treating furnace – Yinuo
100% Original Steel Annealing Furnace - Trolley/Car type industrial electric resistance heat treating furnace – Yinuo Detail:
Trolley regenerative heater:
Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens of pairs. On domestic a few large reheating furnace, use 40 pairs at most. The advantage of regenerative waste heat recovery is that the furnace temperature is more uniform, the heating quality is greatly improved, and the qualified rate of the product is greatly improved. The fuel selection range is more suitable for light oil, heavy oil, natural gas, liquefied petroleum gas and other fuels, especially for the low calorific value of blast furnace gas, generator gas has a good role in preheating combustion, expanding the application range of fuel. As a result, furnace fuel consumption is greatly reduced. For the general large heating furnace, can save energy 25% ~ 30%;For heat treatment furnace, energy saving can be 30% ~ 65%.Traditional energy-saving technology is adopted to reduce NOX production. The higher the preheating temperature of combustion air, the higher the NOX content in flue gas. By using regenerative high temperature air combustion technology, NOX production in the furnace is greatly reduced when the preheating temperature of combustion air is as high as 800℃.Since regenerative combustion is diffuse combustion in a relatively low oxygen state with no flame center, there is no condition to generate a large amount of NOx. Low NOx content in flue gas is beneficial to environmental protection. Oxidation burning of metal another advantage of low-oxygen combustion is that it can reduce the oxidation burning of heated metal. In addition, regenerative combustion can also improve the flame radiation intensity, enhance radiation heat transfer, improve furnace output.
Car type heating furnace is widely uesd in mechanical processing，forging，metallurgy，building materials and other industries，has a stable performance，convenient operation，heating up fast，energy conservation，etc.
Car type heating furnace technology parameters：
Application：all kinds of billet heating before satin
The bottom area：5-50m squared
Fuel types：oil，heat dirty gas，natural gas. city gas
Car transmission forms: pin gear transmission, chain transmission, hoist
Control mode: manual control, automatic control
Product detail pictures:
Related Product Guide:
We also offer product sourcing and flight consolidation services. We have our own factory and sourcing office. We can provide you with almost every type of product related to our product range for 100% Original Steel Annealing Furnace - Trolley/Car type industrial electric resistance heat treating furnace – Yinuo , The product will supply to all over the world, such as: Chile , America , Georgia , Our mission is "Provide Products with Reliable Quality and Reasonable Prices". We welcome customers from every corner of the world to contact us for future business relationships and achieving mutual success!
By Penelope from Swedish - 2018.07.12 12:19
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Jerry from Lesotho - 2017.12.31 14:53