2020 Latest Design Continuous Heat Treatment Furnace - Two-Stage Gas Generator – Yinuo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We emphasize advancement and introduce new products into the market each year for Heat Treatment Annealing Furnace , Ring Furnace , Ring Furnace , Our tenet is "Reasonable prices, economical production time and very best service" We hope to cooperate with much more shoppers for mutual enhancement and benefits.
2020 Latest Design Continuous Heat Treatment Furnace - Two-Stage Gas Generator – Yinuo Detail:

Two-stage gas generator

Double sections of gas occurrence furnace

Two-stage gas generator hot detarred gas station

The process of the two-stage furnace hot de-tarring gas station: the upper gas enters the electrical filter, and its working temperature is between 90-150 °C. The tar droplets and dust in the gas are polarized and collected in the wall of the pole tube and flow to the tar tank. The lower part of the gas passes through the ash hopper, removes the dust of the large particles, and then enters the cyclone to remove the dust. The temperature after dust removal is about 450-550 °C. After mixing the upper gas and the lower gas, it is sent to the heating furnace through the gas transmission pipe.

Two-stage gas generator hot detarred gas station

The gas produced by the two-stage gas generator is divided into the upper section gas and the lower section gas. The upper stage gas advanced level 1 electric tar catcher removes heavy tar and dust. The working temperature is between 90-150 °C, and then enters indirect cooling. The gas is cooled to about 35-45 ° C in the indirect cooler. The lower part of the gas is dedusted by a cyclone, and the temperature after dust removal is about 450-550 °C. Then enter the waste heat exchanger, and then the gas is cooled while recovering the sensible heat of the gas. The gas temperature drops to about 200-230 °C; then enters the air cooler to cool, the temperature drops to 65-801 ° C, and is circulated through the indirect cooler. The cooling water is cooled indirectly to 35-45 °C. After the indirect cooling, the upper part of the gas and the lower part of the gas enter the secondary electric trap to remove the oil again and remove the dust. The gas that has been cooled and purified is pressurized by a pressurizing machine and transported through a gas pipe.


Product detail pictures:

2020 Latest Design Continuous Heat Treatment Furnace -
 Two-Stage Gas Generator – Yinuo detail pictures

2020 Latest Design Continuous Heat Treatment Furnace -
 Two-Stage Gas Generator – Yinuo detail pictures

2020 Latest Design Continuous Heat Treatment Furnace -
 Two-Stage Gas Generator – Yinuo detail pictures

2020 Latest Design Continuous Heat Treatment Furnace -
 Two-Stage Gas Generator – Yinuo detail pictures

2020 Latest Design Continuous Heat Treatment Furnace -
 Two-Stage Gas Generator – Yinuo detail pictures


Related Product Guide:

We have been also concentrating on enhancing the things management and QC method so that we could preserve terrific edge inside the fiercely-competitive enterprise for 2020 Latest Design Continuous Heat Treatment Furnace - Two-Stage Gas Generator – Yinuo , The product will supply to all over the world, such as: azerbaijan , Barcelona , Ecuador , During in 11 years, We have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !
  • Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.
    5 Stars By Esther from Yemen - 2017.03.28 16:34
    Staff is skilled, well-equipped, process is specification, products meet the requirements and delivery is guaranteed, a best partner!
    5 Stars By Albert from Jakarta - 2017.09.16 13:44
    Write your message here and send it to us

    Related products

    • Factory wholesale Wire Annealing Furnace -
 Heat Storage Burner – Yinuo

      Factory wholesale Wire Annealing Furnace - Hea...

    • Big Discount Ceramic Baffle Block -
 Hearth Type Hot Air Circulating Heat Treatment Annealing Furnace | OEM Industrial heating furnace – Yinuo

      Big Discount Ceramic Baffle Block - Hearth Typ...

      1) Furnace Lining Feature In order to quickly heat up the furnace, save energy consumption, and control sensitively, roof, side and back wall lining adopts full fiber structure.To increase the strength of the furnace frame, in the furnace bottom and bogie parts bonded brick building with fire-resistant fibers. The structure has the following characteristics: A. Light weight, less heat storage B. Good insulation, furnace wall is low-temperature (the side surface of furnace temperature rise o...

    • 2020 High quality Bogie Hearth Furnaces -
 New type practical Pushing Reheating Furnace of Steel – Yinuo

      2020 High quality Bogie Hearth Furnaces - New ...

      Process design system features: The system adopts the continuous heating system of heating furnace bottom generally USES gasification cooling. Furnace tail push side out steel or steel furnace furnace tail push steel tapping furnace end. Using air preheater preheating. Fuel for the generator gas, city gas, natural gas. such as the system is divided into six parts: heating furnace system, fuel furnace system, air system, smoke exhaust system, temperature control and automation systems, evapora...

    • factory low price Rolling Furnace -
 Manufacturers process customized heat treatment furnace – Yinuo

      factory low price Rolling Furnace - Manufactur...

      Characteristics of the equipment 1,Design according to the proportion of human engineering, easy operation, modern appearance. 2,Argon Arc full Welding of all stainless Steel in Inner to prevent dust from the machine itself. 3,Unique air-duct design to ensure the temperature inside is uniformity 4,First-class technology of heat &thermal insulation, sealing effect is excellent. 5,Double over-temperature protection, safer and more reliable. 6,Heating up fast, and the temperature is stable a...

    • New Fashion Design for Coal Gas Furnace -
 Single Stage Gas Generator – Yinuo

      New Fashion Design for Coal Gas Furnace - Sing...

      Single stage gas generator Single sections of the gas generator Structure of single-stage gas generator Single sections of the struture of the gas stove There are many structural forms for fixed-bed gas furnaces, which are described as follows according to different parts: For fixed bed gas stove has a variety of structural form,according to the different parts were described as follows: Coal feeding device: intermittent coal charging hood, double material bell, vibration coal feeder, tooth c...

    • One of Hottest for Gas Gasification Equipment -
 Regenerative forging furnace Manufacturers custom processing forging heating furnace – Yinuo

      One of Hottest for Gas Gasification Equipment -...

      Reheating Firnace,After cooling, the slab or blank must be reheated and “softened” for the next molding operation (such as rolling, forging, or extrusion), and the method is rise the temperature to 1600 ° F to 2500 ° F. The process is carried out in a reheating furnace, which is a steel structure protected by the internal refractory. There are many different reheating furnace designs, including the most common and comprehensive types:walking-beamfurnace, walking-beam hearth, rotar...