China Double Regeneratieve Furnace termiese doeltreffendheid fabriek en vervaardigers | Yinuo

Double Regeneratieve Furnace termiese doeltreffendheid

Kort beskrywing:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


produk Detail

produk Tags

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Double regeneratiewe verwarming oond

Tegniese aanwysers:

Verhitting van die werkstuk: groot smeedstukken

Verwarming temperatuur: 1250 ° C

Uitlaatgas temperatuur: 70 ° C

Air Voorverhit temperatuur: 1300 ° C

tipe brandstof: aardgas

Brandstof kalorie waarde: Qd = 8400 × 4.18kJ / m3

Oorspronklike oond type: geboë kluis

Laai en ontlaai metodes: trollie

Oorspronklike oond brander: top plat brander

Rook uitlaat af: kant uitlaat

Gemiddelde brandstofverbruik: <60m3 / h

Gemiddelde oond termiese doeltreffendheid: ≮48.5%

 


  • Vorige:
  • Volgende:

  • Skryf jou boodskap hier en stuur dit aan ons

    Verwante Produkte

    • Double regeneratiewe verwarming oond

      Double regeneratiewe verwarming oond

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • Trolley type heat treatment furnace

      Trolley type heat treatment furnace

      The gas heat treatment furnace is a national standard energy-saving periodic operating furnace with an energy-saving structure. The trolley adopts anti-impact sealing, the furnace door adopts an automatic spring-type compression mechanism, and the trolley and furnace door are automatically sealed, integrated and connected, and no foundation installation is required. It can be used on a level ground. Mainly used for high chromium, high manganese steel castings, ductile iron, rolls, steel balls...

    • 3000 Ton Press verwarming oond

      3000 Ton Press verwarming oond

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • Klein Stap verwarming oond

      Klein Stap verwarming oond

    • Walking beam heating furnace

      Walking beam heating furnace

      The walking beam heating furnace heats the metal billet, and the temperature inside and outside is uniform, and reaches the temperature required for rolling, so that it has a certain degree of plasticity. Function introduction of walking beam heating furnace: for billet heating Introduction to the characteristics of walking beam heating furnace: specially designed charging and discharging mechanism; multiple fuel system; computer optimization system to reduce fuel co...

    • Die Steel uitgloeiing oond

      Die Steel uitgloeiing oond

      Annealing furnace includes: box annealing furnace, trolley annealing furnace, well annealing furnace, vacuum annealing furnace, hood annealing furnace, mobile annealing furnace, pit annealing furnace, ball annealing furnace, etc The purpose of annealing is to heat the steel with microstructure deviating from the equilibrium state to the appropriate temperature, hold the steel for a certain period of time, and then cool it slowly (with furnace cooling) to obtain the heat treatment process of m...