الصين نقرا التجديدي فرن مصنع الكفاءة الحرارية ومصنعي | Yinuo

مزدوجة التجديدي فرن الكفاءة الحرارية

وصف قصير:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


تفاصيل المنتج

علامات المنتج

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

مزدوج فرن التدفئة التجديدي

المؤشرات الفنية:

تسخين الشغل: المطروقات كبيرة

درجة الحرارة للتدفئة: 1250 درجة مئوية

العادم درجة حرارة الغاز: 70 ° C

درجة حرارة التسخين الهواء: 1300 درجة مئوية

نوع الوقود: الغاز الطبيعي

الوقود القيمة الحرارية: قض = 8400 × 4.18kJ / M3

الأصلي نوع الفرن: قبو منحني

التحميل والتفريغ وسائل: عربة

الأصلي فرن الموقد: أعلى شقة لهب الموقد

دخان العادم الوضع: العادم الجانبية

متوسط ​​استهلاك الوقود: <60m3 / ساعة

متوسط ​​فرن الكفاءة الحرارية: ≮48.5٪

 


  • السابق:
  • التالي:

  • اكتب رسالتك هنا وإرساله لنا

    منتجات ذات صله

    • Walking beam heating furnace

      Walking beam heating furnace

      The walking beam heating furnace heats the metal billet, and the temperature inside and outside is uniform, and reaches the temperature required for rolling, so that it has a certain degree of plasticity. Function introduction of walking beam heating furnace: for billet heating Introduction to the characteristics of walking beam heating furnace: specially designed charging and discharging mechanism; multiple fuel system; computer optimization system to reduce fuel co...

    • Commissioning and tapping of 12m heating furnace in Vietnam

      Commissioning and tapping of 12m heating furnac...

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...

    • Trolley type heat treatment furnace

      Trolley type heat treatment furnace

      The gas heat treatment furnace is a national standard energy-saving periodic operating furnace with an energy-saving structure. The trolley adopts anti-impact sealing, the furnace door adopts an automatic spring-type compression mechanism, and the trolley and furnace door are automatically sealed, integrated and connected, and no foundation installation is required. It can be used on a level ground. Mainly used for high chromium, high manganese steel castings, ductile iron, rolls, steel balls...

    • Rolling heating furnace

      Rolling heating furnace

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...

    • New type heating furnace-heat storage walking heating furnace

      New type heating furnace-heat storage walking h...

      Introduction: The regenerative walking reheating furnace is a new type of reheating furnace, which can greatly reduce energy consumption, and can also improve steel production efficiency and billet quality. Advantage: 1. The supporting beams can be arranged staggered, and the heating quality is better; 2. For square billet and rectangular billet, the billet is heated on all sides, the heating speed is fast, the time in the furnace is short, the oxidation burning loss is small, and the energy ...

    • حرارة التخزين الشعلة

      حرارة التخزين الشعلة