Bottom price Regenerative Burner Reheating Furnace - car type heat treating furnace for metal hardening – Yinuo

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We have now sophisticated machines. Our solutions are exported to the USA, the UK and so on, enjoying a great reputation amid consumers for Gas Forging Furnace , Heat Treatment Annealing Furnace , Annealing Furnace Electrical Steel , If needed, welcome to make contact with us by our web page or phone consultation, we will be delighted to serve you.
Bottom price Regenerative Burner Reheating Furnace - car type heat treating furnace for metal hardening – Yinuo Detail:

Trolley regenerative heater:

Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens of pairs. On domestic a few large reheating furnace, use 40 pairs at most. The advantage of regenerative waste heat recovery is that the furnace temperature is more uniform, the heating quality is greatly improved, and the qualified rate of the product is greatly improved. The fuel selection range is more suitable for light oil, heavy oil, natural gas, liquefied petroleum gas and other fuels, especially for the low calorific value of blast furnace gas, generator gas has a good role in preheating combustion, expanding the application range of fuel. As a result, furnace fuel consumption is greatly reduced. For the general large heating furnace, can save energy 25% ~ 30%;For heat treatment furnace, energy saving can be 30% ~ 65%.Traditional energy-saving technology is adopted to reduce NOX production. The higher the preheating temperature of combustion air, the higher the NOX content in flue gas. By using regenerative high temperature air combustion technology, NOX production in the furnace is greatly reduced when the preheating temperature of combustion air is as high as 800℃.Since regenerative combustion is diffuse combustion in a relatively low oxygen state with no flame center, there is no condition to generate a large amount of NOx. Low NOx content in flue gas is beneficial to environmental protection. Oxidation burning of metal another advantage of low-oxygen combustion is that it can reduce the oxidation burning of heated metal. In addition, regenerative combustion can also improve the flame radiation intensity, enhance radiation heat transfer, improve furnace output.

台车式加热炉 (2)

The characteristics:

Car type heating furnace is widely uesd in mechanical processing,forging,metallurgy,building materials and other industries,has a stable performance,convenient operation,heating up fast,energy conservation,etc.

Car type heating furnace technology parameters:

Application:all kinds of billet heating before satin

The bottom area:5-50m squared

Heating temperature:1250-1350℃

Fuel types:oil,heat dirty gas,natural gas. city gas

Car transmission forms: pin gear transmission, chain transmission, hoist

Control mode: manual control, automatic control

台车式锻造加热炉


Product detail pictures:

Bottom price Regenerative Burner Reheating Furnace -
 car type heat treating furnace for metal hardening  – Yinuo detail pictures

Bottom price Regenerative Burner Reheating Furnace -
 car type heat treating furnace for metal hardening  – Yinuo detail pictures

Bottom price Regenerative Burner Reheating Furnace -
 car type heat treating furnace for metal hardening  – Yinuo detail pictures

Bottom price Regenerative Burner Reheating Furnace -
 car type heat treating furnace for metal hardening  – Yinuo detail pictures


Related Product Guide:

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Bottom price Regenerative Burner Reheating Furnace - car type heat treating furnace for metal hardening – Yinuo , The product will supply to all over the world, such as: Holland , Amsterdam , Belarus , We insist on "Quality First, Reputation First and Customer First". We are committed to providing high-quality products and good after-sales services. Up to now, our products have been exported to more than 60 countries and areas around the world, such as America, Australia and Europe. We enjoy a high reputation at home and abroad. Always persisting in the principle of "Credit, Customer and Quality", we expect cooperation with people in all walks of life for mutual benefits.
  • A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
    5 Stars By Andrew from Namibia - 2017.05.02 11:33
    This is the first business after our company establish, products and services are very satisfying, we have a good start, we hope to cooperate continuous in the future!
    5 Stars By Ivy from UK - 2017.05.21 12:31
    Write your message here and send it to us

    Related products