Double regenerative heating furnace

Short Description:

It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs are used in some large-scale regenerative heating furnaces in China.


Product Detail

Product Tags

structure:

It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs are used in some large-scale regenerative heating furnaces in China.

advantage:

Furnace temperature is more even. Because the furnace temperature is evenly distributed, the heating quality is greatly improved, and the product qualification rate is greatly improved.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Iran natural gas rolling furnace

      Iran natural gas rolling furnace

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...

    • 3000 Tons Press Heating Furnace

      3000 Tons Press Heating Furnace

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • Regenerative steel rolling furnace

      Regenerative steel rolling furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...

    • Commissioning and tapping of 12m heating furnace in Vietnam

      Commissioning and tapping of 12m heating furnac...

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...

    • Trolley/Car type industrial electric resistance heat treating furnace

      Trolley/Car type industrial electric resistance...

      Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens o...

    • Rolling heating furnace

      Rolling heating furnace

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...