Hiina Double regeneratiivahjudel soojuslik kasutegur tehases ja tootjad | Yinuo

Double regeneratiivahjudel soojuslik kasutegur

Lühike kirjeldus:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


toote Detail

toote märksõnad

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Double regeneratiivse küte ahju

Tehnilised näitajad:

Küte toorikule: suur sepised

Kuumutamistemperatuur: 1250 ° C

Heitgaasi temperatuur: 70 ° C

Air eelsoojendus temperatuur: 1300 ° C

Kütus: maagaas

Kütus kütteväärtus: Qd = 8400 x 4.18kJ / m3

Original ahjutüübist: kumer võlvi

Peale- ja mahalaadimisel meetodid: käru

Original ahjupõletit: top korter leek põleti

Suitsu režiim: pool väljalaske

Keskmine kütusekulu: <60m3 / h

Keskmine ahju soojuskasutegur ≮48.5%

 


  • Eelmine:
  • Järgmine:

  • Kirjutage oma sõnum siia ja saatke see meile

    Seotud tooted

    • Double regeneratiivse küte ahju

      Double regeneratiivse küte ahju

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • 3000 tonni Press Küte ahju

      3000 tonni Press Küte ahju

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • Walking bottom heating furnace

      Walking bottom heating furnace

      The walking heating furnace is a continuous heating furnace that moves the billets step by step by the rise, advance, fall, and retreat of the furnace bottom or water-cooled metal beam. The furnace has a fixed bottom and a walking bottom, or a fixed beam and a walking beam. The former is called a walking bottom heating furnace, and the latter is a walking beam heating furnace.

    • Double Regenerative Küte ahju

      Double Regenerative Küte ahju

      Structure: The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane. In...

    • Single Stage Gaas Generator

      Single Stage Gaas Generator

      Üheastmelised gaasi generaator Single osa gaasi generaator struktuur üheastmelise gaasi generaator Single osad struture gaasipliidi On palju struktuurseid vorme statsionaarse gaasi ahjud, mis on kirjeldatud järgmiselt vastavalt eri osades: Fikseeritud bed gaasipliit on erinevaid struktuurseid kujul, vastavalt erinevate osade olid kirjeldada järgmiselt: Coal etteandmisseadmest: vahelduva söe laadimise hood, topelt materjalist bell, vibratsioon söe feeder, hamba c ...

    • New type heating furnace-heat storage walking heating furnace

      New type heating furnace-heat storage walking h...

      Introduction: The regenerative walking reheating furnace is a new type of reheating furnace, which can greatly reduce energy consumption, and can also improve steel production efficiency and billet quality. Advantage: 1. The supporting beams can be arranged staggered, and the heating quality is better; 2. For square billet and rectangular billet, the billet is heated on all sides, the heating speed is fast, the time in the furnace is short, the oxidation burning loss is small, and the energy ...