CNFeatured
-
Top Suppliers Gas Forging Furnace - New type p...
Process design system features: The system adopts the continuous heating system of heating furnace bottom generally USES gasification cooling. Furnace tail push side out steel or steel furnace furnace tail push steel tapping furnace end. Using air preheater preheating. Fuel for the generator gas, city gas, natural gas. such as the system is divided into six parts: heating furnace system, fuel furnace system, air system, smoke exhaust system, temperature control and automation systems, evapora...
-
OEM Supply Electrical Steel Annealing Furnace -...
Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...
-
China OEM Electric Furnaces - 3000 Tons Press ...
Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...
-
OEM China Electric Heat Treatment Furnace - Do...
structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...
-
Manufactur standard Slab Heating And Reheating ...
Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens o...
-
Chinese wholesale Heat Treatment Factory - Hea...
-
Wholesale Dealers of Gas Fired Foring Furnace -...
Two-stage gas generator Double sections of gas occurrence furnace Two-stage gas generator hot detarred gas station The process of the two-stage furnace hot de-tarring gas station: the upper gas enters the electrical filter, and its working temperature is between 90-150 °C. The tar droplets and dust in the gas are polarized and collected in the wall of the pole tube and flow to the tar tank. The lower part of the gas passes through the ash hopper, removes the dust of the large particles, and t...
-
Top Quality Gas Fired Annealing Furnace - Doub...
structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...
-
Cheap price Step Heating Furnace Inlet - Doubl...
structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the waste heat recovery of the flue gas of the regenerative heating furnace. It is a room-like space filled with the regenerator and a part of the flue gas and air flow channel. In heating furnaces, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...
-
China wholesale Annealing Oven For Sale - Rege...
Reheating Firnace,After cooling, the slab or blank must be reheated and “softened” for the next molding operation (such as rolling, forging, or extrusion), and the method is rise the temperature to 1600 ° F to 2500 ° F. The process is carried out in a reheating furnace, which is a steel structure protected by the internal refractory. There are many different reheating furnace designs, including the most common and comprehensive types:walking-beamfurnace, walking-beam hearth, rotar...
-
Best Price for Heat Furnace - Continuous Forgi...
Product features: 1. Gas furnace temperature uniform, uniform heat workpiece; 2. Large loading capacity and high productivity of gas furnace; 3.Good insulation performance of gas furnace body, energy saving and production cost reduction; 4. Gas furnace filling royal material convenient, good operating conditions; 5. The gas furnace is equipped with interlocking protection device to prevent faults and accidents caused by misoperation; 6. No pollution, good environmental benefits. Structure in...
-
Good User Reputation for Double Section Cold St...
Single stage gas generator Single sections of the gas generator Structure of single-stage gas generator Single sections of the struture of the gas stove There are many structural forms for fixed-bed gas furnaces, which are described as follows according to different parts: For fixed bed gas stove has a variety of structural form,according to the different parts were described as follows: Coal feeding device: intermittent coal charging hood, double material bell, vibration coal feeder, tooth c...
