Kiina Double regeneratiivisen uunin terminen hyötysuhde tehtaalla ja valmistajat | Yinuo

Kaksinkertainen regeneratiivisen uunin terminen hyötysuhde

Lyhyt kuvaus:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Tuotetiedot

tuotteen Tunnisteet

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Kaksinkertainen uusiutuvia lämmitys uunissa

Tekniset indikaattorit:

Lämmitys työkappaleeseen: suuret takeet

Lämmitys lämpötila: 1250 ° C

Pakokaasun lämpötila: 70 ° C

Ilman esilämmitys lämpötila: 1300 ° C

Polttoaine: maakaasu

Polttoaine lämpöarvo: Qd = 8400 × 4.18kJ / m3

Alkuperäinen uunin tyypin kaareva holvi

Lastaus ja purkaminen menetelmät: vaunun

Alkuperäinen uunin poltin: alkuun tasainen liekkipoltin

Savu pakokaasun tila: puolelle pakokaasun

Keskimääräinen polttoaineenkulutus: <60m3 / h

Keskimääräinen uunin lämpöhyötysuhde: ≮48.5%

 


  • Edellinen:
  • Seuraava:

  • Kirjoita viestisi tähän ja lähetä se meille

    Liittyvät tuotteet

    • 9m double regenerative wire heating furnace

      9m double regenerative wire heating furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° silk-retaining bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required. It can be used on a level ground....

    • Kaksivaiheinen kaasugeneraattorit

      Kaksivaiheinen kaasugeneraattorit

      Kaksivaiheinen kaasu generaattori kahdelle osia kaasun esiintyminen uunin kaksivaiheista kaasun generaattori kuuma detarred huoltoasema menetelmä on kaksivaiheinen uunin kuuma de-tervaantumisesta huoltoasema: ylempi kaasu tulee sähkö- suodatin, ja sen käyttölämpötila on välillä 90 -150 ° C. Terva pisaroiden ja pölyn kaasun polarisoitu ja kerätään seinämän sauvaputken ja virtaus tervan säiliöön. Alempi osa kaasusta kulkee tuhkasuppilon, poistaa pöly suurten hiukkasten ja t ...

    • New type heating furnace-heat storage walking heating furnace

      New type heating furnace-heat storage walking h...

      Introduction: The regenerative walking reheating furnace is a new type of reheating furnace, which can greatly reduce energy consumption, and can also improve steel production efficiency and billet quality. Advantage: 1. The supporting beams can be arranged staggered, and the heating quality is better; 2. For square billet and rectangular billet, the billet is heated on all sides, the heating speed is fast, the time in the furnace is short, the oxidation burning loss is small, and the energy ...

    • Walking beam heating furnace

      Walking beam heating furnace

      The walking beam heating furnace heats the metal billet, and the temperature inside and outside is uniform, and reaches the temperature required for rolling, so that it has a certain degree of plasticity. Function introduction of walking beam heating furnace: for billet heating Introduction to the characteristics of walking beam heating furnace: specially designed charging and discharging mechanism; multiple fuel system; computer optimization system to reduce fuel co...

    • Romu esilämmitysuunin

      Romu esilämmitysuunin

    • Rolling heating furnace

      Rolling heating furnace

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...