TSín Double Athghiniúnach Foirnéise mhonarcha Éifeachtacht Teirmeach agus monaróirí | Yinuo

Double Athghiniúnach Foirnéise Éifeachtacht Teirmeach

Cur síos achomair:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Sonraigh Táirge

Táirge Clibeanna

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Double foirnéise teasa athghiniúnach

táscairí Teicniúil:

Téamh an workpiece: gaibhneachta móra

Teocht Téamh: 1250 ° C

teocht gáis sceite: 70 ° C

Teocht preheating an aeir: 1300 ° C

Cineál Breosla: gás nádúrtha

Breosla luach calrach: QD = 8400 × 4.18kJ / m3

Cineál foirnéise Bunaidh: cruinneachán cuartha

Loading agus a urscaoileadh modhanna: tralaí

burner foirnéise Bunaidh: top dóire lasair árasán

Smoke Modh sceite: sceite taobh

ídiú breosla meán: <60m3 / h

Meán foirnéise éifeachtacht teirmeach: ≮48.5%

 


  • Roimhe Seo:
  • Next:

  • Scríobh do theachtaireacht anseo agus seol chugainn é

    gaolmhar

    • Aonair Gas Gineadóir Céim

      Aonair Gas Gineadóir Céim

      céim amháin gineadóir gáis rannóga aonair ar an Struchtúr gineadóir gáis ailt aon-chéim gineadóir gáis Aonair de na struture an sorn gáis Tá foirmeacha struchtúrtha go leor le haghaidh foirnéisí gáis seasta leaba, a bhfuil cur síos mar seo a leanas i gcomhréir le codanna éagsúla: Do seasta tá sorn gáis leaba éagsúla foirm struchtúrtha, de réir bhí cur síos ar na codanna éagsúla mar seo a leanas: gléas bheathú gual: uaineach guail mhuirearú cochall, clog ábhar dúbailte, friothálacha gual creathadh, fiacail c ...

    • Double foirnéise teasa athghiniúnach

      Double foirnéise teasa athghiniúnach

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • 3000 Tonnaí Preas Teas Foirnéise

      3000 Tonnaí Preas Teas Foirnéise

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • New type heating furnace-heat storage walking heating furnace

      New type heating furnace-heat storage walking h...

      Introduction: The regenerative walking reheating furnace is a new type of reheating furnace, which can greatly reduce energy consumption, and can also improve steel production efficiency and billet quality. Advantage: 1. The supporting beams can be arranged staggered, and the heating quality is better; 2. For square billet and rectangular billet, the billet is heated on all sides, the heating speed is fast, the time in the furnace is short, the oxidation burning loss is small, and the energy ...

    • Natural gas heat treatment furnace

      Natural gas heat treatment furnace

      The gas heat treatment furnace is a national standard energy-saving periodic operating furnace with an energy-saving structure. The trolley adopts anti-impact sealing, the furnace door adopts an automatic spring-type compression mechanism, and the trolley and furnace door are automatically sealed, integrated and connected, and no foundation installation is required. It can be used on a level ground. Mainly used for high chromium, high manganese steel castings, ductile iron, rolls, steel balls...

    • Natural Gas Rolling Cruach Foirnéise Teas

      Natural Gas Rolling Cruach Foirnéise Teas

      Continuous rolling furnace can be divided into: stepping furnace, ring furnace, double regenerative furnace, single regenerative furnace; Applicable to various specifications, billet, round billet, slab heating process. Main performance: Fuel types: blast furnace gas, mixed gas, producer gas, natural gas Heating steel: structural steel, low alloy steel, superior carbon steel, stainless steel; Blank: standard blank, blank; Steel out: end in side out, end in end out, cantilever roll out of ste...