Heating Furnace

  • Regenerative heating furnace

    Regenerative heating furnace

    Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...

  • 9m double regenerative wire heating furnace

    9m double regenerative wire heating furnace

    Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° silk-retaining bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required. It can be used on a level ground....

  • Single Regenerative Heating Furnace

    Single Regenerative Heating Furnace

    The working principle of single regenerative heating furnace: Using blast furnace gas as fuel, the calorific value of gas is 800 kcal/m3, and the calorific value of gas is low. Therefore, it adopts air and gas double regenerative burners, equipped with a complete heating furnace parameter detection and control system, and a single regenerative heating furnace detects and controls various thermal parameters such as temperature, pressure, and flow rate of the heating furnace, and has display An...

  • Double regenerative heating furnace

    Double regenerative heating furnace

    structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

  • Double regenerative heating furnace

    Double regenerative heating furnace

    structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the waste heat recovery of the flue gas of the regenerative heating furnace. It is a room-like space filled with the regenerator and a part of the flue gas and air flow channel. In heating furnaces, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

  • Regenerative steel rolling furnace

    Regenerative steel rolling furnace

    Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...

  • Induction Heater Regenerative Pulsed Natural Gas Heating Furnace

    Induction Heater Regenerative Pulsed Natural Ga...

    Introduction: The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface. Scope of application: Mainly used for high chromium, hi...

  • Special for rolling mills pant steel billet induction heating furnace

    Special for rolling mills pant steel billet ind...

    Continuous rolling furnace can be divided into: stepping furnace, ring furnace, double regenerative furnace, single regenerative furnace; Applicable to various specifications, billet, round billet, slab heating process. Main performance: Fuel types: blast furnace gas, mixed gas, producer gas, natural gas Heating steel: structural steel, low alloy steel, superior carbon steel, stainless steel; Blank: standard blank, blank; Steel out: end in side out, end in end out, cantilever roll out of ste...

  • Industrial furnace high performance gas combustion continuous reflection melting and holding furnace

    Industrial furnace high performance gas combust...

    Continuous rolling furnace can be divided into: stepping furnace, ring furnace, double regenerative furnace, single regenerative furnace; Applicable to various specifications, billet, round billet, slab heating process. Main performance: Fuel types: blast furnace gas, mixed gas, producer gas, natural gas Heating steel: structural steel, low alloy steel, superior carbon steel, stainless steel; Blank: standard blank, blank; Steel out: end in side out, end in end out, cantilever roll out of ste...

  • Experienced Factory Source Step-by-step Walking Beam Heating Furnace For Sale

    Experienced Factory Source Step-by-step Walking...

    The step type heating furnace is a kind of continuous heating furnace which relies on the rising, advancing, descending and retreating movements of the bottom of the furnace or the water-cooled metal beam to transfer the material billet step by step.The furnace has a fixed bottom and a stepping bottom, or a fixed beam and a stepping beam.The former is called step bottom type furnace, the latter is called step beam type furnace.The stepping beam of a heating furnace for steel rolling usually c...

  • Trolley/Car type industrial electric resistance heat treating furnace

    Trolley/Car type industrial electric resistance...

    Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens o...

  • car type heat treating furnace for metal hardening

    car type heat treating furnace for metal hardening

    Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens o...

123 Next > >> Page 1 / 3