Չինաստանը Կրկնակի վերածնող վառարան Ջերմային արդյունավետություն գործարան եւ արտադրողների | Yinuo

Կրկնակի վերածնող վառարան Ջերմային արդյունավետություն

Կարճ նկարագրություն:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Ապրանք Մանրամասն

Product Tags

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Կրկնակի վերածնող ջեռուցման վառարան

Տեխնիկական ցուցանիշները:

Ջեռուցման դետալը: խոշոր կռածոները

Ջեռուցման ջերմաստիճանը: 1250 ° C

Սպառել գազի ջերմաստիճանը: 70 ° C

Օդի նախնական տաքացման ջերմաստիճանը: 1300 ° C

Վառելիքի տեսակը: Բնական գազ

Վառելիքի կալորիականությունը: QD = 8400 × 4.18kJ / մ 3

Բնօրինակը հնոց տեսակը: կոր պահոց

Բեռնման եւ լիցքաթափում մեթոդները: տրոլեյբուս

Բնօրինակը հնոց այրիչ: վերեւ հարթ բոց այրիչ

Ծխում արտանետումային ռեժիմ: կողմը սպառել

Վառելիքի միջին ծախսը: <60m3 / ժ

Միջին հնոց ջերմային արդյունավետությունը: ≮48.5%

 


  • Նախորդ:
  • Հաջորդ:

  • Գրեք Ձեր հաղորդագրությունն այստեղ եւ ուղարկեք այն մեզ

    related products

    • Small walking furnace

      Small walking furnace

      Overview Walking-type heating furnace is a widely used furnace type with rapid development. It is the main furnace type that replaces push-saw heating furnace. It has an incomparable advantage over push-steel furnace. Advantages of walking furnace: 1. Flexible heating 2. Good heating quality: there is a certain gap between the billets, the billet is heated on all sides, the temperature is relatively uniform, the billet surface has no scratches, and the billet has no black marks. 3. Unrestrict...

    • Կրկնակի վերածնող ջեռուցման վառարան

      Կրկնակի վերածնող ջեռուցման վառարան

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the waste heat recovery of the flue gas of the regenerative heating furnace. It is a room-like space filled with the regenerator and a part of the flue gas and air flow channel. In heating furnaces, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • Կրկնակի վերածնող ջեռուցման վառարան

      Կրկնակի վերածնող ջեռուցման վառարան

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the flue gas waste heat recovery of the regenerative heating furnace. It is a room-like space filled with the regenerator and is a part of the flue gas and air flow channels. In the heating furnace, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • Regenerative steel rolling furnace

      Regenerative steel rolling furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...

    • Տրոլեյբուս տեսակը Heat Բուժում վառարան

      Տրոլեյբուս տեսակը Heat Բուժում վառարան

      Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system.Regenerator is the main body of waste heat recovery of regenerator flue gas.In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens of ...

    • Խողովակ seamless Քայլ ջեռուցման վառարան

      Խողովակ seamless Քայլ ջեռուցման վառարան

      The step type heating furnace is a kind of continuous heating furnace which relies on the rising, advancing, descending and retreating movements of the bottom of the furnace or the water-cooled metal beam to transfer the material billet step by step.The furnace has a fixed bottom and a stepping bottom, or a fixed beam and a stepping beam.The former is called step bottom type furnace, the latter is called step beam type furnace.The stepping beam of a heating furnace for steel rolling usually c...