Cina Ganda Regenerative Furnace Thermal Efisiensi pabrik dan produsen | Yinuo

Ganda Regenerative Furnace Thermal Efisiensi

Deskripsi Singkat:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Rincian produk

Tags produk

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Ganda regeneratif tungku pemanas

Indikator teknis:

Pemanasan benda kerja: tempa besar

suhu pemanasan: 1250 ° C

Suhu gas buang: 70 ° C

Suhu pemanasan awal udara: 1300 ° C

jenis bahan bakar: gas alam

nilai kalor bahan bakar: Qd = 8400 × 4.18kJ / m3

Asli jenis tungku: kubah melengkung

Bongkar muat metode: trolley

Asli tungku pembakar: top datar api burner

Merokok modus knalpot: knalpot samping

Rata-rata konsumsi bahan bakar: <60m3 / h

Rata-rata tungku efisiensi termal: ≮48.5%

 


  • Sebelumnya:
  • Berikutnya:

  • Tulis pesan Anda di sini dan kirimkan kepada kami

    Produk-produk terkait

    • 3000 Ton Tekan Pemanasan Furnace

      3000 Ton Tekan Pemanasan Furnace

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • Terus menerus Tempa Furnace

      Terus menerus Tempa Furnace

      Product features: 1. Gas furnace temperature uniform, uniform heat workpiece; 2. Large loading capacity and high productivity of gas furnace; 3.Good insulation performance of gas furnace body, energy saving and production cost reduction; 4. Gas furnace filling royal material convenient, good operating conditions; 5. The gas furnace is equipped with interlocking protection device to prevent faults and accidents caused by misoperation; 6. No pollution, good environmental benefits. Structure in...

    • Walking bottom heating furnace

      Walking bottom heating furnace

      The walking heating furnace is a continuous heating furnace that moves the billets step by step by the rise, advance, fall, and retreat of the furnace bottom or water-cooled metal beam. The furnace has a fixed bottom and a walking bottom, or a fixed beam and a walking beam. The former is called a walking bottom heating furnace, and the latter is a walking beam heating furnace.

    • 9m double regenerative wire heating furnace

      9m double regenerative wire heating furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° silk-retaining bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required. It can be used on a level ground....

    • New type heating furnace-heat storage walking heating furnace

      New type heating furnace-heat storage walking h...

      Introduction: The regenerative walking reheating furnace is a new type of reheating furnace, which can greatly reduce energy consumption, and can also improve steel production efficiency and billet quality. Advantage: 1. The supporting beams can be arranged staggered, and the heating quality is better; 2. For square billet and rectangular billet, the billet is heated on all sides, the heating speed is fast, the time in the furnace is short, the oxidation burning loss is small, and the energy ...

    • Scrap Preheating Furnace

      Scrap Preheating Furnace