China Duplo Regenerative Furnace fábrica eficiência térmica e fabricantes | Yinuo

Eficiência térmica dupla Regenerative Furnace

Pequena descrição:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Detalhes do produto

Etiquetas de produtos

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Duplo forno de aquecimento regenerativo

Indicadores técnicos:

O aquecimento da peça: grandes peças forjadas

Temperatura de aquecimento: 1250 ° C

a temperatura dos gases de escape: 70 ° C

temperatura de pré-aquecimento do ar: 1300 ° C

tipo de combustível: gás natural

poder calorífico do combustível: Qd = 8400 × 4.18kJ / m3

Tipo de forno original: abóbada encurvada

Carga e descarga métodos: carrinho

queimador forno Original: top queimador de chama plana

Fuma modo de escape: escape lateral

O consumo médio de combustível: <60m3 / h

forno média eficiência térmica: ≮48.5%

 


  • Anterior:
  • Seguinte:

  • Escreva aqui a sua mensagem e enviá-lo para nós

    Produtos relacionados

    • Walking beam heating furnace

      Walking beam heating furnace

      The walking beam heating furnace heats the metal billet, and the temperature inside and outside is uniform, and reaches the temperature required for rolling, so that it has a certain degree of plasticity. Function introduction of walking beam heating furnace: for billet heating Introduction to the characteristics of walking beam heating furnace: specially designed charging and discharging mechanism; multiple fuel system; computer optimization system to reduce fuel co...

    • Die aço Forno de recozimento

      Die aço Forno de recozimento

      Annealing furnace includes: box annealing furnace, trolley annealing furnace, well annealing furnace, vacuum annealing furnace, hood annealing furnace, mobile annealing furnace, pit annealing furnace, ball annealing furnace, etc The purpose of annealing is to heat the steel with microstructure deviating from the equilibrium state to the appropriate temperature, hold the steel for a certain period of time, and then cool it slowly (with furnace cooling) to obtain the heat treatment process of m...

    • Rolando Gás Natural Aço forno de aquecimento

      Rolando Gás Natural Aço forno de aquecimento

      Continuous rolling furnace can be divided into: stepping furnace, ring furnace, double regenerative furnace, single regenerative furnace; Applicable to various specifications, billet, round billet, slab heating process. Main performance: Fuel types: blast furnace gas, mixed gas, producer gas, natural gas Heating steel: structural steel, low alloy steel, superior carbon steel, stainless steel; Blank: standard blank, blank; Steel out: end in side out, end in end out, cantilever roll out of ste...

    • Trolley type heat treatment furnace

      Trolley type heat treatment furnace

      The gas heat treatment furnace is a national standard energy-saving periodic operating furnace with an energy-saving structure. The trolley adopts anti-impact sealing, the furnace door adopts an automatic spring-type compression mechanism, and the trolley and furnace door are automatically sealed, integrated and connected, and no foundation installation is required. It can be used on a level ground. Mainly used for high chromium, high manganese steel castings, ductile iron, rolls, steel balls...

    • 50 toneladas de gás natural rolamento de aço aquecimento do forno

      50 toneladas de gás natural rolamento de aço Aquecimento Fu ...

      Continuous rolling furnace can be divided into: stepping furnace, ring furnace, double regenerative furnace, single regenerative furnace; Applicable to various specifications, billet, round billet, slab heating process. Main performance: Fuel types: blast furnace gas, mixed gas, producer gas, natural gas Heating steel: structural steel, low alloy steel, superior carbon steel, stainless steel; Blank: standard blank, blank; Steel out: end in side out, end in end out, cantilever roll out of ste...

    • Trolley Tipo de Tratamento Térmico Furnace

      Trolley Tipo de Tratamento Térmico Furnace

      Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system.Regenerator is the main body of waste heat recovery of regenerator flue gas.In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens of ...