China dublă Regenerare Cuptor fabrica Randament termic și producătorii | Yinuo

Dubla Regenerare Cuptor Randament termic

Scurta descriere:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Detaliile produsului

Tag-uri produs

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Dublu cuptor de încălzire de regenerare

Tehnice de indicatori:

Încălzire piesa de lucru: piese forjate mari

Temperatura de încălzire: 1250 ° C

Temperatura gazelor de evacuare: 70 ° C

Temperatura aerului de preincalzire: 1300 ° C

Tipul de combustibil: gaz natural

Combustibil Valoarea calorică: Qd = 8400 × 4.18kJ / m3

cuptor de tip original: bolta curbat

Încărcarea și descărcarea metode: troleibuz

arzător cuptor original: top arzător cu flacără plat

Fum Mod de evacuare: evacuare laterală

Consumul mediu de carburant: <60m3 / h

cuptor medie randament termic: ≮48.5%

 


  • Previous:
  • În continuare:

  • Scrie aici mesajul tau si trimite-l la noi

    Produse asemanatoare

    • Small walking furnace

      Small walking furnace

      Overview Walking-type heating furnace is a widely used furnace type with rapid development. It is the main furnace type that replaces push-saw heating furnace. It has an incomparable advantage over push-steel furnace. Advantages of walking furnace: 1. Flexible heating 2. Good heating quality: there is a certain gap between the billets, the billet is heated on all sides, the temperature is relatively uniform, the billet surface has no scratches, and the billet has no black marks. 3. Unrestrict...

    • Single Regenerative Heating Furnace

      Single Regenerative Heating Furnace

      The working principle of single regenerative heating furnace: Using blast furnace gas as fuel, the calorific value of gas is 800 kcal/m3, and the calorific value of gas is low. Therefore, it adopts air and gas double regenerative burners, equipped with a complete heating furnace parameter detection and control system, and a single regenerative heating furnace detects and controls various thermal parameters such as temperature, pressure, and flow rate of the heating furnace, and has display An...

    • Iran natural gas rolling furnace

      Iran natural gas rolling furnace

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...

    • Dublu cuptor de încălzire de regenerare

      Dublu cuptor de încălzire de regenerare

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the waste heat recovery of the flue gas of the regenerative heating furnace. It is a room-like space filled with the regenerator and a part of the flue gas and air flow channel. In heating furnaces, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • Carucior Tip Tratament termic Cuptor

      Carucior Tip Tratament termic Cuptor

      Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system.Regenerator is the main body of waste heat recovery of regenerator flue gas.In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens of ...

    • Continuă Forjare Cuptor

      Continuă Forjare Cuptor

      Product features: 1. Gas furnace temperature uniform, uniform heat workpiece; 2. Large loading capacity and high productivity of gas furnace; 3.Good insulation performance of gas furnace body, energy saving and production cost reduction; 4. Gas furnace filling royal material convenient, good operating conditions; 5. The gas furnace is equipped with interlocking protection device to prevent faults and accidents caused by misoperation; 6. No pollution, good environmental benefits. Structure in...