Kitajska Double regenerativne peči tovarna Toplotna učinkovitost in proizvajalci | Yinuo

Dvojna regenerativne peči Toplotna učinkovitost

Kratek opis:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Podrobnosti izdelka

Značke izdelka

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Dvojna regenerativno peč

Tehnični kazalci:

Segrevanje obdelovanca: velikih odkovkov

Ogrevanje temperatura: 1250 ° C

Izpušni temperatura plina: 70 ° C

Temperatura zraka predgrevanje: 1300 ° C

Vrsta goriva: zemeljski plin

kalorična vrednost goriva: Qd = 8400 x 4.18kJ / m3

Original pe: ukrivljena obok

Polnjenju in praznjenju metode: voziček

Originalni peč gorilnik: zgornji ploščati plamen gorilnika

Smoke izpušni način: stran izpušni

Povprečna poraba goriva: <60m3 / h

Povprečni peč toplotna učinkovitost: ≮48.5%

 


  • Prejšnja:
  • Naprej:

  • Napišite sporočilo tukaj in nam ga pošljite

    Podobni izdelki

    • Regenerativna peč

      Regenerativna peč

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...

    • Small walking furnace

      Small walking furnace

      Overview Walking-type heating furnace is a widely used furnace type with rapid development. It is the main furnace type that replaces push-saw heating furnace. It has an incomparable advantage over push-steel furnace. Advantages of walking furnace: 1. Flexible heating 2. Good heating quality: there is a certain gap between the billets, the billet is heated on all sides, the temperature is relatively uniform, the billet surface has no scratches, and the billet has no black marks. 3. Unrestrict...

    • 3000 ton kovanje peči

      3000 ton kovanje peči

    • 9m double regenerative wire heating furnace

      9m double regenerative wire heating furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° silk-retaining bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required. It can be used on a level ground....

    • Dvojna regenerativno peč

      Dvojna regenerativno peč

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the waste heat recovery of the flue gas of the regenerative heating furnace. It is a room-like space filled with the regenerator and a part of the flue gas and air flow channel. In heating furnaces, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • Enotna stopnja Gas Generator

      Enotna stopnja Gas Generator

      plinski generator Enostopenjski Posamezni odseki plinski generator Struktura generatorskih enostopenjski plinski enotnih slojev struture peči plina Obstaja veliko strukturne oblike za plinske peči z mirujočo plastjo, ki so opisane glede na različne dele: Za določen peč postelja plin ima različne strukturne oblike, po katerem se lahko različni deli so opisana kot sledi: naprava za krmljenje premog: s kompresorjem premoga polnjenje napa, dvojno materiala zvonca, vibracije podajanje premog, zobno c ...