Small walking furnace

Short Description:

Walking-type heating furnace is a widely used furnace type with rapid development. It is the main furnace type that replaces push-saw heating furnace. It has an incomparable advantage over push-steel furnace.


Product Detail

Product Tags

Overview

Walking-type heating furnace is a widely used furnace type with rapid development. It is the main furnace type that replaces push-saw heating furnace. It has an incomparable advantage over push-steel furnace.

Advantages of walking furnace:

1. Flexible heating

2. Good heating quality: there is a certain gap between the billets, the billet is heated on all sides, the temperature is relatively uniform, the billet surface has no scratches, and the billet has no black marks.

3. Unrestricted furnace length: It is not restricted by the push-to-steel ratio, and can heat thin and long materials.

4. Convenient operation: according to the production situation, the blanks in the furnace can be withdrawn from the furnace, shortening the furnace opening time, because there is a gap between the blanks, it is not easy to stick.

5. The position of the blank can be accurately controlled to facilitate automatic operation.

parameter

1. Furnace name: walking-type heating furnace.

2. Fuel types: blast furnace gas, mixed gas, producer gas, natural gas, etc.

3. Adding steel materials: carbon structure steel, low-grade steel, stainless steel, etc.

4. Blank size: standard square billet, slab, etc.

5. Loading and unloading methods: side in and side out, end in and end out, end in and out, etc.

6. Combustion method: double heat storage of air and gas, single heat storage of air capacity, heat exchange of air capacity, etc.

7. Heating capacity: <300t/h

8. Heating temperature: 1150-1250℃

9. Step cooling method: water cooling, vaporization cooling (forced circulation)

10. Comparable unit consumption: <1.05GJ/t steel

11. Oxidation burn loss: <1%


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • Trolley/Car type industrial electric resistance heat treating furnace

      Trolley/Car type industrial electric resistance...

      Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens o...

    • Walking bottom heating furnace

      Walking bottom heating furnace

      The walking heating furnace is a continuous heating furnace that moves the billets step by step by the rise, advance, fall, and retreat of the furnace bottom or water-cooled metal beam. The furnace has a fixed bottom and a walking bottom, or a fixed beam and a walking beam. The former is called a walking bottom heating furnace, and the latter is a walking beam heating furnace.

    • Iran natural gas rolling furnace

      Iran natural gas rolling furnace

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...

    • 3000 Tons Press Heating Furnace

      3000 Tons Press Heating Furnace

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • Regenerative heating furnace

      Regenerative heating furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° wire-resting bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required, and it can be used on a level groun...

    • Commissioning and tapping of 12m heating furnace in Vietnam

      Commissioning and tapping of 12m heating furnac...

      The function of the rolling furnace is to heat the billet. Generally called continuous heating furnace and walking heating furnace. The preheating, heating and isothermal of the billet are completed at one time. Driven by the pusher, the billet enters the preheating zone in the furnace for preheating, and gradually enters the heating zone. The moving speed is determined according to the cross-sectional area of the billet. Isothermal is to ensure that the temperature ...