Kina Double Regenerativ Furnace termisk verkningsgrad fabrik och tillverkare | Yinuo

Double Regenerative Furnace termisk verkningsgrad

Kort beskrivning:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Produktdetalj

produkt~~POS=TRUNC

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Dubbel regenerativ värmeugn

Tekniska indikatorer:

Uppvärmning av arbetsstycket: stora smide

Uppvärmningstemperatur: 1250 ° C

Avgastemperatur: 70 ° C

Luft förvärmningstemperatur: 1300 ° C

bränsletyp: naturgas

Bränsle värmevärde: Qd = 8400 × 4.18kJ / m3

Original ugnstyp: böjda valv

Lastning och lossning metoder: vagn

Original ugn brännare: top flat flamma brännare

Röka avgas läge: sidoavgas

Genomsnittliga bränsleförbrukning: <60m3 / h

Genomsnittlig ugn termisk verkningsgrad: ≮48.5%

 


  • Föregående:
  • Nästa:

  • Skriv ditt meddelande här och skicka det till oss

    Relaterade produkter

    • Seamless Tube Steg värmeugn

      Seamless Tube Steg värmeugn

      The step type heating furnace is a kind of continuous heating furnace which relies on the rising, advancing, descending and retreating movements of the bottom of the furnace or the water-cooled metal beam to transfer the material billet step by step.The furnace has a fixed bottom and a stepping bottom, or a fixed beam and a stepping beam.The former is called step bottom type furnace, the latter is called step beam type furnace.The stepping beam of a heating furnace for steel rolling usually c...

    • Litet steg värmeugn

      Litet steg värmeugn

    • Double Regenerative värmeugn

      Double Regenerative värmeugn

      Structure: The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane. In...

    • Small walking furnace

      Small walking furnace

      Overview Walking-type heating furnace is a widely used furnace type with rapid development. It is the main furnace type that replaces push-saw heating furnace. It has an incomparable advantage over push-steel furnace. Advantages of walking furnace: 1. Flexible heating 2. Good heating quality: there is a certain gap between the billets, the billet is heated on all sides, the temperature is relatively uniform, the billet surface has no scratches, and the billet has no black marks. 3. Unrestrict...

    • Walking beam heating furnace

      Walking beam heating furnace

      The walking beam heating furnace heats the metal billet, and the temperature inside and outside is uniform, and reaches the temperature required for rolling, so that it has a certain degree of plasticity. Function introduction of walking beam heating furnace: for billet heating Introduction to the characteristics of walking beam heating furnace: specially designed charging and discharging mechanism; multiple fuel system; computer optimization system to reduce fuel co...

    • Walking bottom heating furnace

      Walking bottom heating furnace

      The walking heating furnace is a continuous heating furnace that moves the billets step by step by the rise, advance, fall, and retreat of the furnace bottom or water-cooled metal beam. The furnace has a fixed bottom and a walking bottom, or a fixed beam and a walking beam. The former is called a walking bottom heating furnace, and the latter is a walking beam heating furnace.