China Double Regenerative Furnace Thermal Ufanisi viwanda na wazalishaji | Yinuo

Double Regenerative Furnace Thermal Ufanisi

Maelezo Mafupi:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Bidhaa Detail

Tags bidhaa

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Double regenerative joto tanuri

Ufundi viashiria:

Inapokanzwa workpiece: forgings kubwa

Inapokanzwa joto: 1250 ° C

Kutolea nje gesi joto: 70 ° C

Air preheating joto 1300 ° C

Aina ya mafuta: gesi asilia

Mafuta kawi: Qd = 8400 × 4.18kJ / m 3

Aina Original tanuru ikiwa kuba

Loading na kutekeleza mbinu: Trolley

Original tanuri burner: juu ya gorofa moto burner

Moshi mode kutolea nje: upande wa kutolea nje

Wastani wa matumizi ya mafuta <60m3 / h

Wastani tanuri mafuta ufanisi: ≮48.5%

 


  • Awali:
  • Next:

  • Andika ujumbe wako hapa na kutuma kwa sisi

    bidhaa zinazohusiana

    • Hatua mbili gesi Generator

      Hatua mbili gesi Generator

      Hatua mbili gesi jenereta Double sehemu ya gesi ya tukio tanuri hatua mbili gesi jenereta moto detarred kituo cha mafuta mchakato wa hatua mbili tanuri kituo cha moto de-tarring gesi: gesi ya juu inaingia filter umeme, na joto yake ya kazi ni kati ya 90 -150 ° C. lami matone na vumbi katika gesi polarized na zilizokusanywa katika ukuta wa bomba pole na kati yake na tank lami. sehemu ya chini ya gesi hupitia majivu Hopper, kuondosha vumbi chembe kubwa, na t ...

    • Tani 3,000 Press Kukanza Furnace

      Tani 3,000 Press Kukanza Furnace

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • Walking bottom heating furnace

      Walking bottom heating furnace

      The walking heating furnace is a continuous heating furnace that moves the billets step by step by the rise, advance, fall, and retreat of the furnace bottom or water-cooled metal beam. The furnace has a fixed bottom and a walking bottom, or a fixed beam and a walking beam. The former is called a walking bottom heating furnace, and the latter is a walking beam heating furnace.

    • New type heating furnace-heat storage walking heating furnace

      New type heating furnace-heat storage walking h...

      Introduction: The regenerative walking reheating furnace is a new type of reheating furnace, which can greatly reduce energy consumption, and can also improve steel production efficiency and billet quality. Advantage: 1. The supporting beams can be arranged staggered, and the heating quality is better; 2. For square billet and rectangular billet, the billet is heated on all sides, the heating speed is fast, the time in the furnace is short, the oxidation burning loss is small, and the energy ...

    • Double regenerative joto tanuri

      Double regenerative joto tanuri

      structure: It is composed of heating furnace body, regenerator, reversing system, fuel, air supply and smoke exhaust system. The regenerator is the main body of the waste heat recovery of the flue gas of the regenerative heating furnace. It is a room-like space filled with the regenerator and a part of the flue gas and air flow channel. In heating furnaces, the regenerators are always used in pairs. One furnace can use one pair, several pairs, or even dozens of pairs. More than forty pairs ar...

    • Seamless Tube Hatua Kukanza Furnace

      Seamless Tube Hatua Kukanza Furnace

      The step type heating furnace is a kind of continuous heating furnace which relies on the rising, advancing, descending and retreating movements of the bottom of the furnace or the water-cooled metal beam to transfer the material billet step by step.The furnace has a fixed bottom and a stepping bottom, or a fixed beam and a stepping beam.The former is called step bottom type furnace, the latter is called step beam type furnace.The stepping beam of a heating furnace for steel rolling usually c...