Trolley/Car type industrial electric resistance heat treating furnace

Short Description:

Car type heating furnace is widely uesd in mechanical processing,forging,metallurgy,building materials and other industries,has a stable performance,convenient operation,heating up fast,energy conservation,etc.


Product Detail

Product Tags

Trolley regenerative heater:

Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens of pairs. On domestic a few large reheating furnace, use 40 pairs at most. The advantage of regenerative waste heat recovery is that the furnace temperature is more uniform, the heating quality is greatly improved, and the qualified rate of the product is greatly improved. The fuel selection range is more suitable for light oil, heavy oil, natural gas, liquefied petroleum gas and other fuels, especially for the low calorific value of blast furnace gas, generator gas has a good role in preheating combustion, expanding the application range of fuel. As a result, furnace fuel consumption is greatly reduced. For the general large heating furnace, can save energy 25% ~ 30%;For heat treatment furnace, energy saving can be 30% ~ 65%.Traditional energy-saving technology is adopted to reduce NOX production. The higher the preheating temperature of combustion air, the higher the NOX content in flue gas. By using regenerative high temperature air combustion technology, NOX production in the furnace is greatly reduced when the preheating temperature of combustion air is as high as 800℃.Since regenerative combustion is diffuse combustion in a relatively low oxygen state with no flame center, there is no condition to generate a large amount of NOx. Low NOx content in flue gas is beneficial to environmental protection. Oxidation burning of metal another advantage of low-oxygen combustion is that it can reduce the oxidation burning of heated metal. In addition, regenerative combustion can also improve the flame radiation intensity, enhance radiation heat transfer, improve furnace output.

台车式锻造加热炉3

The characteristics:

Car type heating furnace is widely uesd in mechanical processing,forging,metallurgy,building materials and other industries,has a stable performance,convenient operation,heating up fast,energy conservation,etc.

Car type heating furnace technology parameters:

Application:all kinds of billet heating before satin

The bottom area:5-50m squared

Heating temperature:1250-1350℃

Fuel types:oil,heat dirty gas,natural gas. city gas

Car transmission forms: pin gear transmission, chain transmission, hoist

Control mode: manual control, automatic control

蓄热式台车加热炉


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • 3000 Tons Forging Furnace

      3000 Tons Forging Furnace

    • 3000 Tons Press Heating Furnace

      3000 Tons Press Heating Furnace

      Heating furnace structure: According to the furnace temperature distribution, the furnace chamber along the length direction is divided into preheating section, heating section and soaking section. The lower temperature of the furnace at the feeding end is the preheating section.Heating section is the primary heating section, the furnace temperature is higher, to facilitate the end of rapid heating. The soaking zone is located at the discharging end, and the difference between the temperature...

    • 50 Tons Of Natural Gas Rolling Steel Heating Furnace

      50 Tons Of Natural Gas Rolling Steel Heating Fu...

      Continuous rolling furnace can be divided into: stepping furnace, ring furnace, double regenerative furnace, single regenerative furnace; Applicable to various specifications, billet, round billet, slab heating process. Main performance: Fuel types: blast furnace gas, mixed gas, producer gas, natural gas Heating steel: structural steel, low alloy steel, superior carbon steel, stainless steel; Blank: standard blank, blank; Steel out: end in side out, end in end out, cantilever roll out of ste...

    • car type heat treating furnace for metal hardening

      car type heat treating furnace for metal hardening

      Trolley regenerative heater: Regenerative heating furnace is essentially a combination of efficient regenerative heat exchanger and conventional heating furnace, which is mainly composed of heating furnace body, regenerative chamber, reversing system, fuel, air supply and smoke exhaust system. Regenerator is the main body of waste heat recovery of regenerator flue gas. In a heating furnace, the regenerator is always used in pairs, one stove can use a pair, can use several pairs, even dozens o...

    • Hearth Type Hot Air Circulating Heat Treatment Annealing Furnace | OEM Industrial heating furnace

      Hearth Type Hot Air Circulating Heat Treatment ...

      1) Furnace Lining Feature In order to quickly heat up the furnace, save energy consumption, and control sensitively, roof, side and back wall lining adopts full fiber structure.To increase the strength of the furnace frame, in the furnace bottom and bogie parts bonded brick building with fire-resistant fibers. The structure has the following characteristics: A. Light weight, less heat storage B. Good insulation, furnace wall is low-temperature (the side surface of furnace temperature rise o...