Trung Quốc đúp Regenerative lò nhà máy hiệu quả nhiệt và các nhà sản xuất | Yinuo

Đôi Regenerative lò Hiệu quả nhiệt

Mô tả ngắn:

Introduction: the national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.


Chi tiết sản phẩm

Thẻ sản phẩm

Structure:

The bottom of the regenerative trolley heating furnace is a movable trolley.Before heating, the trolley loads materials outside the furnace, the heating parts are put on the special pad iron, and then the trolley is pulled into the furnace by the traction mechanism for heating. After heating, the trolley is pulled out of the furnace by the traction mechanism for unloading, and then the heated workpiece is hoisted to the forging and pressing equipment for processing by the crane.

Introduction:

The national standard energy-saving cycle type furnace, super energy-saving structure, with composite fiber insulation, super lightweight high strength beads vacuum energy saving brick, exclusive rights to produce the brick off 20 ° inclined put on silk silk, collision brick front against the workpiece, automatic sealing car and oven door, integration of rail, without foundation installation, can be used on a level surface.

Scope of application:

Mainly used for high chromium, high manganese steel castings, gray cast iron, nodular cast iron, roll, steel ball, hammer head of crusher, wear-resistant lining plate quenching, annealing, aging and heat treatment of various mechanical parts.

中钢蓄热式锻造炉

Advantage:

1.Average gas consumption: 45-55m3/t.(natural gas)

2. Smoke extraction temperature ≤150℃

3. Furnace temperature uniformity ≤±10℃

4. The average life of imported components for directional valve is ≥ 200,000 times.

Function:

Regenerative combustion can improve the flame radiation intensity, enhance radiation heat transfer and increase furnace output.

蓄热 式 台 车 加热炉

Đôi lò sưởi ấm tái sinh

các chỉ số kỹ thuật:

Nóng phôi: rèn lớn

Nhiệt độ làm nóng: 1250 ° C

nhiệt độ khí thải: 70 ° C

Air nhiệt độ sấy sơ bộ: 1300 ° C

Loại nhiên liệu: khí thiên nhiên

nhiệt trị nhiên liệu: Qd = 8400 × 4.18kJ / m3

loại lò gốc: vault cong

Bốc dỡ các phương pháp: xe đẩy

burner lò ban đầu: đỉnh bằng phẳng ngọn lửa burner

Hút thuốc chế độ xả: xả bên

tiêu thụ nhiên liệu trung bình: <60m3 / h

lò trung bình hiệu suất nhiệt: ≮48.5%

 


  • Trước:
  • Tiếp theo:

  • Viết tin nhắn của bạn ở đây và gửi cho chúng tôi

    Sản phẩm liên quan

    • Hai giai đoạn Gas Generator

      Hai giai đoạn Gas Generator

      máy phát điện khí hai giai đoạn đúp phần xảy ra khí lò tạo khí hai giai đoạn nóng detarred trạm xăng Quá trình hai giai đoạn lò trạm nóng de-tarring khí: khí trên đi vào bộ lọc điện, và nhiệt độ làm việc của nó là từ 90 -150 ° C. Các giọt tar và bụi trong khí được phân cực và thu được trong các bức tường của các ống cực và chảy vào bể tar. Phần dưới của khí đi qua phễu tro, loại bỏ các bụi của các hạt lớn, và t ...

    • Bước nhỏ sưởi lò

      Bước nhỏ sưởi lò

    • Walking beam heating furnace

      Walking beam heating furnace

      The walking beam heating furnace heats the metal billet, and the temperature inside and outside is uniform, and reaches the temperature required for rolling, so that it has a certain degree of plasticity. Function introduction of walking beam heating furnace: for billet heating Introduction to the characteristics of walking beam heating furnace: specially designed charging and discharging mechanism; multiple fuel system; computer optimization system to reduce fuel co...

    • Liên tục Rèn lò

      Liên tục Rèn lò

      Product features: 1. Gas furnace temperature uniform, uniform heat workpiece; 2. Large loading capacity and high productivity of gas furnace; 3.Good insulation performance of gas furnace body, energy saving and production cost reduction; 4. Gas furnace filling royal material convenient, good operating conditions; 5. The gas furnace is equipped with interlocking protection device to prevent faults and accidents caused by misoperation; 6. No pollution, good environmental benefits. Structure in...

    • Ống liền mạch Bước sưởi lò

      Ống liền mạch Bước sưởi lò

      The step type heating furnace is a kind of continuous heating furnace which relies on the rising, advancing, descending and retreating movements of the bottom of the furnace or the water-cooled metal beam to transfer the material billet step by step.The furnace has a fixed bottom and a stepping bottom, or a fixed beam and a stepping beam.The former is called step bottom type furnace, the latter is called step beam type furnace.The stepping beam of a heating furnace for steel rolling usually c...

    • 9m double regenerative wire heating furnace

      9m double regenerative wire heating furnace

      Introduction: National standard energy-saving periodic operating furnace, super energy-saving structure, composite fiber insulation, ultra-lightweight and high-strength micro-bead vacuum ball energy-saving bricks, production of anti-dropping and upward oblique 20° silk-retaining bricks, furnace mouth anti-workpiece impact bricks, automatic The sealed trolley and the furnace door are integrated and connected to the rail. No foundation installation is required. It can be used on a level ground....